 |
G -2512 |
G-2515 Steel Channels
|
| Application of data:Loads
shown apply to G-2515 regular steel channel installed with the continuous
slot on the underside. The loads may also be applied to G-2512 regular steel
channel installed with the slot on the topside provided that the channel lips are
restrained from lateral movement at the channel ends, and at intervals of 3' 6"
maximum. The lip restraint can be accomplished by attaching any fitting to the channel
with the aid of a Globe Strut Lock Nut Uniform
Loads: See table below.
Concentrated Loads: Allowable concentrated
loads can be obtained by dividing the uniform load by two. Deflection for the concentrated
load can be found by multiplying the deflection of the uniform load by .08. |
 |
 |
 |
MATERIAL OPTIONS
- Plain steel, conforming to ASTM A569-72 (standard)
- Plain steel, conforming to ASTM A570-79, Gr. 33 (available
on request).
- Hot-dip mill-galvanized steel, conforming to ASTM A526-80
(standard).
- Hot-dip mill-galvanized steel, conforming to ASTM A446-80
Gr. A (available on request).
FINISH OPTIONS
- Hot-dip mill-galvanized, conforming to ASTM A525-80, coating
class G90.
- Green Paint
- Gold chromate.
LENGTH OPTIONS
- 10'-01/4", 20'-01/2"
(± 1/8", standard tolerance)
MATERIAL & FINISH
- Alloy 6063-T6, conforming to ASTM B221-74, extruded with
min. 070" wall thickness, mill finish.
LENGTH OPTIONS
- 10'-01/4", 20'-01/2"
(± 1/8", standard tolerance)
|