 WING-SHAPED FITTINGS PAGE 1
STANDARD MATERIAL/FINISH
- Steel, conforming to ASTM A575-81
- Zinc-electroplated conforming to ASTM B-633-78 (standard)
- Hot-dip galvanizing-after-fabrication, conforming to ASTM
A153-82 or ASTM A123-84 (available on request)
|
General
Data
Holes—9/16" diam.
1-7/8" o.c. spacing
13/16" center-to-end distance
Material—1-5/8" width |